Datxplore for Windows 32 bits
Prerequisites
none
About the installer
- Copy the installer on your Desktop or in your windows temporary directory.
- Double click on the executable and follow the instructions.
License
This software do not require an activation key.
Running
Under Windows operating system, go to the Start menu, go to the Datxplore folder, then click on the Datxplore icon.
Versions
Version | User guide |
---|---|
1.0.1 | User Guide |
Mlxplore for Windows 32 bits
Prerequisites
none
About the installer
- Copy the installer on your Desktop or in your windows temporary directory.
- Double click on the executable and follow the instructions.
License
This software requires an activation key: please go to the download page if you do not have your license key yet. The license activation procedure can be seen on the download page at the license activation section.
Running
Under Windows operating system, go to the Start menu, go to the Mlxplore folder, then click on the Mlxplore icon.
Versions
Version | User guides |
---|---|
1.1.1 | Mlxplore user guide – Mlxtran guide for model construction |
Monolix for Windows 32 bits
Prerequisites
none. Matlab is not necessary to run this version of the software.
perl is required to run perlScripts and the validation suite; it is not required otherwise.
About the installer
- Copy the installer on your Desktop or in your windows temporary directory.
- Double click on the executable and follow the instructions.
License
This software requires an activation key: please go to the download page if you do not have your license key yet. The license activation procedure can be seen on the download page at the license activation section.
Running
Matlab version: start Matlab, go to directory ’<install path>/matlab’ and type monolix.
Standalone version: go to the Start menu, go to the Monolix folder, then click on the Monolix icon.
Versions
Version | StandAlone | From Matlab 2010bSP1 to Matlab 2014a | From Matlab 2009a to Matlab 2010a | Installation guide | Full documentation | RLM (for floating license) |
---|---|---|---|---|---|---|
4.3.2 | 432s | 432-2010b | 432-2010a | InstallGuide-432 | Doc-432 | RLM for 432 |
4.3.1 | 431s | 431-2010b | 431-2010a | InstallGuide-431 | Doc-431 | RLM for 431 |
4.3.0 | 430s | 430-2010b | 430-2010a | InstallGuide-430 | Doc-430 | RLM for 430 |
4.2.2 | 422s | 422-2010b | 422-2010a | InstallGuide-422 | Doc-422 | RLM for 422 |
4.2.1 | 421s | 421-2010b | 421-2010a | InstallGuide-421 | Doc-421 | RLM for 421 |
4.2.0 | 420s | 420-2010b | 420-2010a | InstallGuide-420 | Doc-420 | RLM for 420 |
Simulator for Windows 32 bits
Prerequisites
The simulator is a calculation engine. Therefore, it can not be used directly and has no interface. Thus, connectors were developed in R to use it. Therefore, R version should be 3.0.2 or higher, Rcpp version 0.11 or higher.
License
This software requires an activation key: please go to the download page if you do not have your license key yet. The license activation procedure can be seen on the download page at the license activation section.
Running
For the calculation engine Simulx, the user should access it through R.
Versions
Version | User guides |
---|---|
1.1.0 | Mlxtran syntax for Simulx – Installation Guide |